基于耦合声场建模的膨胀腔消声器声学性能分析及试验

针对圆柱形膨胀腔消声器三维建模及声学性能分析问题, 提出一种基于切比雪夫变分原理的耦合声场建模方法, 建立三维圆柱形膨胀腔消声器理论模型并搭建试验台架, 传递损失试验结果验证了理论模型的准确性. 将膨胀腔消声器内部声场分解为多个子声场, 基于子声场间压力与质点振速连续性条件, 推导声场耦合变分公式, 构建子声场拉格朗日泛函. 将子声场声压函数展开为切比雪夫-傅里叶级数形式, 通过瑞利-里兹法求解膨胀腔消声器频率、声压响应及传递损失. 计算并对比分析扩张比、扩张腔长度、进出口管偏置对膨胀腔消声器消声性能的影响. 结果表明: 扩张比增大会有效提高消声器在低频段的消声性能, 进出口管的偏置对消声器消声性能影响很小.     

Aggregate error locator and error value computation in AG codes

The aggregate error locator is defined and a computation method is given. The aggregate error locator is then used in a type of Forney algorithm to compute the error values in the received words of a Ca,b algebraic geometry code.     

内部审核在计量体系中的作用

介绍内部审核制度在计量测试工作中的目的和作用，提出了内部审核工作应注意的事项，如内部审核工作计划的完整性，内部审核工作的有效性，管理者工作内容的全面性，以及后续工作的完善性。     

Zero weights and non-zero slacks: Different solutions to the same problem

This paper re-assesses three independently developed approaches that are aimed at solving the problem of zero-weights or non-zero slacks in Data Envelopment Analysis (DEA). The methods are weights restricted, non-radial and extended facet DEA models. Weights restricted DEA models are dual to envelopment DEA models with restrictions on the dual variables (DEA weights) aimed at avoiding zero values for those weights; non-radial DEA models are envelopment models which avoid non-zero slacks in the input-output constraints. Finally, extended facet DEA models recognize that only projections on facets of full dimension correspond to well defined rates of substitution/transformation between all inputs/outputs which in turn correspond to non-zero weights in the multiplier version of the DEA model. We demonstrate how these methods are equivalent, not only in their aim but also in the solutions they yield. In addition, we show that the aforementioned methods modify the production frontier by extending existing facets or creating unobserved facets. Further we propose a new approach that uses weight restrictions to extend existing facets. This approach has some advantages in computational terms, because extended facet models normally make use of mixed integer programming models, which are computationally demanding.     

Evaluation of the Lazarus-Leblond constants in the asymptotic model of the interfacial wavy crack

The paper addresses the problem of a semi-infinite plane crack along the interface between two isotropic half-spaces. Two methods of solution have been considered in the past: Lazarus and Leblond [1998a. Three-dimensional crack-face weight functions for the semi-infinite interface crack-I: variation of the stress intensity factors due to some small perturbation of the crack front. J. Mech. Phys. Solids 46, 489-511, 1998b. Three-dimensional crack-face weight functions for the semi-infinite interface crack-II: integrodifferential equations on the weight functions and resolution J. Mech. Phys. Solids 46, 513-536] applied the “special” method by Bueckner [1987. Weight functions and fundamental fields for the penny-shaped and the half-plane crack in three space. Int. J. Solids Struct. 23, 57-93] and found the expression of the variation of the stress intensity factors for a wavy crack without solving the complete elasticity problem; their solution is expressed in terms of the physical variables, and it involves five constants whose analytical representation was unknown; on the other hand, the “general” solution to the problem has been recently addressed by Bercial-Velez et al. [2005. High-order asymptotics and perturbation problems for 3D interfacial cracks. J. Mech. Phys. Solids 53, 1128-1162], using a Wiener-Hopf analysis and singular asymptotics near the crack front.The main goal of the present paper is to complete the solution to the problem by providing the connection between the two methods. This is done by constructing an integral representation for Lazarus-Leblond's weight functions and by deriving the closed form representations of Lazarus-Leblond's constants.     

类型γ射线能谱指纹的识别机理

放射源的辐射指纹能起到标识和鉴别放射性物体的作用.在涉及核弹头不可逆销毁过程的深度核裁军核查中,核弹头的辐射指纹对标识和鉴别裁减下来的核弹头将起到关键作用.预先研究辐射指纹的有关技术,如识别机理的研究,将有助于深度核裁军的核弹头核查技术发展.以实验室放射源为研究对象,探索了类型γ射线能谱指纹的同一性识别机理.类型γ射线指纹识别机理的研究,就是要找出一种合适的方法,以较高的置信度,描述两个正在进行比较的γ射线指纹是否为同一放射源的指纹.采用了谱形比较法,并用谱相似度概念来描述两个指纹的相似程度.在谱形比较思想的指导下,编制了放射源类型指纹识别软件,并通过放射源同一性的识别实验验证了软件的有效性,同时研究了谱相似度随统计涨落和测量条件,如时间、源强和本底等因素的变化情况.研究结果表明:1)用相似度概念来描述两个指纹的相似程度,回答两个待比较的γ射线能谱是否代表同一类型放射源,是切实可行的;2)该识别机理只具备识别放射源类型的能力,而对同一类型、差异甚微的放射源个体还不能识别 关键词： γ射线能谱指纹 辐射指纹 识别机理 核查技术     

啤酒发酵储罐间氧气探测报警器的作用及其检定

简要介绍便携式与固定式氧气探测报警器的区别及其在啤酒发酵储罐间的应用,列出了氧气探测报警器检定的主要技术指标。     

复流形局部q-凸楔形上带权的同伦公式

本文得到复流形局部q-凸楔形上(r,s)型微分形式的带权的同伦公式和(r,s)型的方程的带权的连续解,并给出(r,s)型微分形式的不含边界积分的新的带权的同伦公式和(r,s)型的方程的新的带权的连续解.这些新的带权公式尤其适用于具有非光滑边界的局部q-凸楔形,这时不但可以避免边界积分的复杂估计,而且积分密度也不必在边界有定义,只要在区域上有定义就行.其次,引进权因子,带权的积分公式在应用上(比如在函数的插值方面)具有更大的灵活性.     

气相色谱仪检定结果的不确定度评定

气相色谱仪检定结果的不确定度主要来源于流速稳定性、柱箱温度稳定性、基线噪声、定量重复性和标准物质进样量的不确定度。以TCD检测器为例进行分析,对气相色谱仪检定结果的不确定度进行评定,相对扩展不确定度为5%。     

非线型缩聚物的重均分子量

本文用数学期望方法研究了非线型共缩聚物的重均分子量,并推导出重均分子量表达式,将3种特例的理论曲线与实验结果相比较,两者基本相符。